Atlas
Standing Leg Curl: starting position Standing Leg Curl: end position

Knee Flexion · Hamstrings

Standing Leg Curl

A knee flexion exercise that works the hamstrings. Beginner level, using machine.

The standing leg curl trains one hamstring at a time on a dedicated machine, with your torso supported and leaning forward. Because it is unilateral, it helps you spot and fix strength gaps between legs. It suits beginners and works well as an accessory in leg days or injury-prevention work for runners and field athletes.

BeginnerMachineGym

Muscles worked

PrimaryHamstrings

The working leg's hamstrings bend the knee with help from the calf. Your standing leg and core work lightly to keep your hips still against the pad.

Setup and loading

Set the machine so your working knee lines up with the pivot and the roller sits just above your heel, with your thigh against the pad. Pick a weight that lets you do 10 to 15 reps per leg without your hips lifting off.

How to do the standing leg curl step by step

  1. Face the machine with your torso leaning on the support, hands on the handles, and your working knee lined up with the pivot.
  2. Hook the roller behind your working ankle and rest your thigh on the pad while your other leg stands firm on the platform.
  3. Exhale and curl your heel toward your glutes without shifting your hips or arching your back.
  4. Squeeze for one second at the top with your thigh still pressed into the pad.
  5. Inhale and lower slowly until your leg is nearly straight, without letting the weight rest.
  6. Finish all reps on one leg, then switch to the other with the same weight.

Form cues

  • Hips pinned to the pad
  • Heel to glute
  • Squeeze one second at the top
  • Start with your weaker leg

Common mistakes

  • Shifting the hips to lift: your back and glutes cheat; lighten the load and lock your pelvis.
  • Arching the lower back: it adds spinal stress; brace your abs and stay on the support.
  • Roller sitting on the calf: it shortens leverage and pinches; set it just above the heel.
  • Dropping the weight: you lose the eccentric; take two to three seconds on the way down.

How to make it easier or harder

If the weight feels hard to control, start with a standing band curl or a light seated leg curl. To advance, add two-second pauses at the top, four-second negatives, or drop sets.

Advertisement

Sets and reps for your goal

Hypertrophy

3 x 10-15 · rest 60 s

3-4 sets of 6-12 reps (up to 15-20 on isolation exercises) at 65-80% of your max. Rest 1 to 2 minutes.

Get close to failure (0-3 reps in reserve) and control the lowering for 2-3 seconds. Accumulate 10-20 sets per muscle per week.

A guide for healthy adults. Adjust the load to your level and see a professional if you have an injury.

Check your form

Film yourself from the side or ask someone to watch, then tick what you get right.

0 of 4

Frequently asked questions

Why train hamstrings one leg at a time?

Working each leg alone stops the stronger side from covering for the weaker one and helps balance strength. It also makes it easier to focus on the squeeze and carries over well to sports involving sprinting or cutting.

What if my gym has no standing leg curl machine?

Use a low cable with an ankle strap while leaning on a bench, or do a single-leg lying or seated curl. The hamstring stimulus is very similar as long as you keep your hips still.

Sports it suits

Variations and similar exercises

Advertisement