Atlas
Chest-Supported Incline Dumbbell Row: starting position Chest-Supported Incline Dumbbell Row: end position

Horizontal Pull · Traps & mid back

Chest-Supported Incline Dumbbell Row

A horizontal pull exercise that works the traps & mid back. Beginner level, using dumbbells.

The chest-supported incline dumbbell row is done face down on a bench set to 30 to 45 degrees. Since you do not have to hold your torso up, it takes stress off your lower back and removes momentum, so all your focus goes to your back. It is ideal for beginners and anyone with a cranky lower back.

BeginnerDumbbellsGymHome

Muscles worked

SecondaryBiceps, Forearms, Lats, Shoulders

It works the rhomboids, mid traps, lats, and rear delts, which pull your elbows back and squeeze your shoulder blades together. The biceps and forearms help with the pull and grip.

Setup and loading

Set the bench to 30 to 45 degrees and lie with your chest at the top of the pad and feet on the floor. Use a neutral grip and a weight that allows 10 to 15 strict reps without lifting your chest.

How to do the chest-supported incline dumbbell row step by step

  1. Set the bench between 30 and 45 degrees and lie face down with your chest on the pad and chin just above the top.
  2. Let a dumbbell hang in each hand with a neutral grip and arms straight under your shoulders.
  3. Before pulling, draw your shoulder blades back slightly so the movement starts from your back.
  4. Exhale and row the dumbbells toward your sides, driving your elbows back at about 30 to 45 degrees from your body.
  5. Hold the top squeeze for one second while your chest stays in contact with the bench.
  6. Inhale and lower slowly until your arms are straight and you feel a stretch between your shoulder blades.

Form cues

  • Chest glued to the bench
  • Shoulder blades first, then elbows
  • No momentum or bouncing
  • One-second pause at the top

Common mistakes

  • Lifting your chest off the bench: it adds momentum and back strain; reduce the weight.
  • Shrugging toward your ears: it loads the upper traps; keep your shoulders low.
  • Flaring the elbows wide: it shifts work to the rear delts; keep them at 30 to 45 degrees for the back.
  • Bench set too steep: it shortens the useful range; stay at 45 degrees or lower.

How to make it easier or harder

To make it easier, use light dumbbells and focus on the shoulder blade squeeze, or try a chest-supported machine row. To progress, increase the weight, add three-second pauses at the top, or move to the free bent-over row.

Advertisement

Sets and reps for your goal

Hypertrophy

3-4 x 8-12 · rest 60-90 s

3-4 sets of 6-12 reps (up to 15-20 on isolation exercises) at 65-80% of your max. Rest 1 to 2 minutes.

Get close to failure (0-3 reps in reserve) and control the lowering for 2-3 seconds. Accumulate 10-20 sets per muscle per week.

Max Strength

4-5 x 3-6 · rest 2-3 min

3-6 sets of 1-6 reps at 80-90% of your max (1RM). Rest 2 to 5 minutes.

Leave 1-3 reps in reserve. If your technique breaks down, lower the weight: strength is built with good reps.

A guide for healthy adults. Adjust the load to your level and see a professional if you have an injury.

Check your form

Film yourself from the side or ask someone to watch, then tick what you get right.

0 of 4

Frequently asked questions

Why do chest-supported rows?

They remove the lower back demand of holding your torso and stop you from cheating with momentum. That lets you focus on your back, which helps if your lower back is sore or your program already has plenty of hinging.

What incline should I use?

Between 30 and 45 degrees works for most people. Lower angles increase range but can be uncomfortable on the neck; steeper angles shorten the movement and make it feel more like a high row.

Sports it suits

Gear for this exercise

  • Adjustable dumbbellsSave space and replace a whole dumbbell rack at home.

As an Amazon Associate, Muscle Atlas earns from qualifying purchases.

Variations and similar exercises

Advertisement